Handling of effluents in chemical and other industries is easily performed by Diaphragm Hand Pump.

 In tannery waste management, these pumps work very well due to its non-clog design. In case effluent is acidic in nature, pump in Polypropylene (size 1.5”) at 50 LPM can do the job. In non chemical duties pumps in Cast Iron (size 1.5” or 2”) (at 50 or 100 LPM) are suitable. 

These pumps form good addition to pollution control plant equipment. They are low cost substitute to Edson Pump, Wilden Pump, Aro Pump, Double Diaphragm Pumps, and Yamada Pumps etc. for duty conditions as above. 

Many pollution control consultants recommend these pumps as main/ auxiliary/ stand-by equipment.